The DCS is a twin screw pump, with sanitary design, suitable for use in the dairy, food and beverage, cosmetics, etc.
The flow is uniform and in an axial direction, so there are no changes of volume or physical properties of the product. Therefore it is an ideal pump for handling shear-sensitive fluids.
It has a high suction lift capability with very low NPSH values.
It is capable of pumping liquids with high viscosity, but also with low viscosity, so it can be used as a CIP-supply pump.
The design ensures a fully cleanability and drainability.
DCS Bomba de Parafuso Duplo
DCS Bomba de Parafuso Duplo
Solicitar informação
DCS Bomba de Parafuso Duplo
Solicitar informação
DCS Bomba de Parafuso Duplo
Desenho e características
The DCS pumps are available in two versions: close coupled and bare shaft construction. They have a two part design (pumpcasing and separate flange). The mechanical seals have a sanitary design. When required, other materials can be used.
Motor
Triphasic induction motor with B5 flange and B3 legs for monoblock version.
Triphasic induction motor with B3 legs for bare shaft version.
In both versions the motor complies with the IEC standards, efficiency class according to EC regulation, IP 55 protection and F-class insulation.
3 phases, 50 Hz, 230 V Δ / 400 V Y, ≤ 4 kW
3 phases, 50 Hz, 400 V Δ / 690 V Y, ≤ 5,5 kW
Materiais
Parts in contact with the product 1.4404 (AISI 316L)
Bearing support 1.4401 (AISI 316)
Gear housing aluminium
Gaskets in contact with the product EPDM
Mechanical seal
Rotary part silicon carbide (SiC)
Stationary part silicon carbide (SiC)
Gasket EPDM
Surface finish
Internal Ra ≤ 0,8 μm
External Matt
Opções
Mechanical seals: TuC/TuC
Knife-edge single mechanical seals
Double mechanical seals
Gaskets: FPM, HNBR, FFKM
Heating chamber
Bareshaft version
Connections: Clamp, SMS, Flanges
ATEX Certification
Documentos
Ficha técnica (5)
Princípio de funcionamento
Materiais and Opções
Parts in contact with the product 1.4404 (AISI 316L)
Bearing support 1.4401 (AISI 316)
Gear housing aluminium
Gaskets in contact with the product EPDM
Mechanical seal
Rotary part silicon carbide (SiC)
Stationary part silicon carbide (SiC)
Gasket EPDM
Surface finish
Internal Ra ≤ 0,8 μm
External Matt
Mechanical seals: TuC/TuC
Knife-edge single mechanical seals
Double mechanical seals
Gaskets: FPM, HNBR, FFKM
Heating chamber
Bareshaft version
Connections: Clamp, SMS, Flanges
ATEX Certification
Documentos
| N.º do documento | 01.531.33.01ES |
| Título | Bomba de Doble Tornillo DCS |
| Tipo de arquivo | |
|
|
| N.º do documento | 01.531.33.01EN |
| Título | Twin Screw Pump DCS |
| Tipo de arquivo | |
|
|
| N.º do documento | 01.531.33.01FR |
| Título | Pompe à Double Vis DCS |
| Tipo de arquivo | |
|
|
| N.º do documento | 01.531.33.01IT |
| Título | Pompa a doppia vite DCS |
| Tipo de arquivo | |
|
|
| N.º do documento | 01.531.33.01RU |
| Título | Двухвинтовой насос DCS |
| Tipo de arquivo | |
|
|
| N.º do documento | 01.531.30.01EN |
| Título | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS TWIN SCREW PUMP DCS |
| Tipo de arquivo | |
|
|
| N.º do documento | 01.531.30.03EN |
| Título | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS TWIN SCREW PUMP DCS - ANNEX ATEX |
| Tipo de arquivo | |
|
|
Produtos relacionados
-
SLR
Bomba de Lóbulo Sanitária
A bomba SLR é uma bomba de lóbulo de deslocação positiva e de design...
-
HLR
Bomba de Lóbulo Rotativa Higiénica
A bomba HLR é uma bomba de lóbulo rotativa de deslocação positiva...
-
TLS
Bomba Lobular Monobloco
A bomba TLS é uma bomba lobular rotativa de deslocação positiva e design...
-
DCH
Bomba de Parafuso Duplo
A DCH é uma bomba de parafuso duplo com um design higiénico adequada para uso nos...
